Hikvision 4 Port Unmanaged PoE Switch,1*100M Uplink [DS-3E0105P-E]

Reference: HIK-3E0105P-E

Condition: New

$92.00 inc GST

Quantity

In Stock

Key Features

Layer 2 unmanaged PoE switch

4x 10/100Mbps Ethernet ports

1x 100Mbps uplink

IEEE 802.3af or 802.3at PoE standard

802.3af or 802.3at

More details

More info
DATASHEET
3 YEAR WARRANTY
Local Support
Delivery
Reviews

The Hikvision HIK-3E0105P-E is an unmanaged switch that requires no configuration and has 4 10/100Mbps PoE (Power over Ethernet) ports and 1 100Mbps port for uplink. It can automatically detect and supply power to all IEEE 802.3af/at compliant powered devices. With its Extended Transmission mode feature, this switch can extend PoE range from 100m to 250m by decreasing the throughput to 10Mbps.

Ports
Network Ports:	\|	5
PoE Port:	\|	4, 10/100Mbps RJ45 ports
Uplink Port:	\|	1, 100M Ethernet Port
Standard
Network Protocol:	\|	IEEE802.3,802.3u,802.3x, 802.3af, 802.3at
Performance
Switching Capacity:	\|	1Gbps
Max. Forwarding Rate:	\|	0.74Mpps
High Priority Ports:	\|	Port 1
Forwarding Mode:	\|	Store-and-forward
MAC Address Table:	\|	1k
Flow Control:	\|	IEEE802.3x full duplex
Power Over Ethernet
PoE Standard:	\|	IEEE802.3af, IEEE802.3at
PoE Power Budget:	\|	58W
Working Mode:	\|	Extend On:250m,10M,CAT 5e Extend Off:100m
General
Power Supply:	\|	51V DC, 1.25A
Power Consumption:	\|	≤63W
Surge Protection:	\|	4KV
Working Temperature:	\|	Temperature: 0℃-40℃
Working Humidity:	\|	Humidity: 10%-90% , non-condensing
Storage Temperature:	\|	Temperature: -40℃-70℃
Storage Humidity:	\|	Humidity: 5%-90% , non-condensing
Weight:	\|	0.299kg
Dimension:	\|	132 mm* 93.3mm * 27.6mm

Please use this section to leave your comments about this product!

DS-3E0105P-E Datasheet

All DIY Security Cameras, Hikvision Cameras, Intercoms and recording device (NVR's/DVR's) are covered by a
three (3) year back-to base manufacturer warranty. (Note disk drives limited to 1 one year)

Our warranty is limited to the replacement of faulty goods and does not include damage due to incorrect fitting of parts or accessories.

It is the customers responsibility to ensure that items you order are correctly specified for the intended use.

Please refer to our Terms & Conditions and Warranty Against Defects documentation for full details.

Customer Support

At DIY Security Cameras we value our customers and the trust they have placed in us.

As part of our committment to providing exceptional customer service, we offer on-going after sales support for your Hikvision products. We have a professional team that are available to assist with setup and troubleshooting issues that may arise with your system.

Valued DIY Security Cameras customers enjoy access to our support logging system, regular updates to device firmware and specialised documentation as well as other benefits.

Our support team can be contact at support@diysecuritycameras.com.au

Shipping and Delivery Policy

DIY Security Cameras deliver products Australia wide using a variety of courier companies for a flat fee.

Deliveries to Northern Territory need to be quoted. Please contact us for a quote.

Due to security reasons, all deliveries will need to be signed for at destination by the purchaser. In cases where the nominated purchaser is not available at the time of delivery at the location, then products will need to be collected from the designated place as determined by the courier company.

We do not deliver to PO Boxes.

We cannot leave your delivery at the front door.

Orders are dispatched within 3 business days and shipping times are estimated at between 3-5 business days depending on your location within Australia.

Please note that delivery times maybe extended over the Public Holiday periods.

All special orders and in some cases if the product is not available at our distributor and needs to be specially ordered from the manufacturer, product delivery time can take up to 4-5 weeks.