Close

2MP | WiFi Room Station | Flush Mount | PoE Switch
DIY-GEN2-KIT7 View larger

Hikvision GEN2 IP Intercom Kit, 1 to 1 Villa, Door & Room Station with Flush Mount,PoE Switch [DIY-GEN2-KIT7]

HIK-INT-GEN2-KIT7

New

$593.60 inc GST

In Stock

Basic Intercom starter kit.

Door Station (DS-KD8003-IME1)

  • 2MP HD video intercom function
  • Access control function
  • Noise suppression and echo cancellation
  • Low illumination
  • Tampering alarm supported
  • Fisheye camera with IR supplement light
  • Supports up to 8 sub-modules’
  • Nametag customisation
  • Easy to expand.
  • IP65 rating
  • H.264 video compression
  • -40 to +60 degrees Celsius operating temperature
  • Dimensions: 98 x 99.8 x 43.9mm

Indoor Station (DS-KH6320-WTE1)

  • 7 inch touch screen
  • 1024 x 600 resolution
  • Standard PoE
  • 128MB memory
  • Up to 32GB micro SD slot for memory expansion
  • Built-in omnidirectional microphone & loudspeaker
  • Supports Wireless network
  • Messages and captured pictures stored in the TF card
  • Remote unlocking via the client software or the mobile client
  • Views live videos of door stations and linked cameras
  • -10 to +55 degrees Celsius operating temperature
  • Dimensions: 200 x 140 x 15.1mm

Flush Mount (DS-KD-ACF1-P)

  • Includes gang box, cover, screws, lines, etc.
  • Adapts to one-module flush mounting
  • Material: plastic
  • Operating temperature: -40 to 60 degrees celsius
  • Cover dimensions: 134 x 124 x 4mm
  • Gang box dimensions: 134 x 135 x 56mm

Hikvision 4 Port Unmanaged PoE Switch (DS-3E0105P-E)

  • Layer 2 unmanaged PoE switch
  • 4x 10/100Mbps Ethernet ports
  • 1x 100Mbps uplink
  • IEEE 802.3af or 802.3at PoE standard
  • 802.3af or 802.3at

DS-3E0105P-E

Please use this section to leave your comments about this product!
pdf-icon DS-KD8003-IME1 Datasheet
pdf-icon DS-KD8003-IME1 Installation Guide
pdf-icon DS-KH6320-WTE1 Datasheet
pdf-icon DS-KH6320-WTE1 Installation Guide
DS-3E0105P-E Datasheet
pdf-icon DS-KD-ACF1-P Datasheet

Shipping and Delivery Policy

  • DIY Security Cameras deliver products Australia wide using a variety of courier companies for a flat fee.
  • Deliveries to Northern Territory need to be quoted. Please contact us for a quote.
  • Due to security reasons, all deliveries will need to be signed for at destination by the purchaser. In cases where the nominated purchaser is not available at the time of delivery at the location, then products will need to be collected from the designated place as determined by the courier company.
  • We do not deliver to PO Boxes.
  • We cannot leave your delivery at the front door.
  • Orders are dispatched within 3 business days and shipping times are estimated at between 3-5 business days depending on your location within Australia.
  • Please note that delivery times maybe extended over the Public Holiday periods.
  • All special orders and in some cases if the product is not available at our distributor and needs to be specially ordered from the manufacturer, product delivery time can take up to 4-5 weeks.
2nd Generation Intercom

pdf-icon
Brochure

Indoor Stations


pdf-icon Indoor Station Configuration Guide
pdf-icon Indoor Station Operation Guide
pdf-icon Indoor Station Quick Start Guide

Door Stations

pdf-icon Door Station User Manual

Hikvision Mobile Clients

Hik-Connect
(Prefered)
iPhone
iPAD
Android

iVMS4500-Lite iVMS4500-Lite iPhone
iPAD
Android


Hikvision PC Clients

iVMS4200
Windows
MAC

All DIY Security Cameras, Hikvision Cameras, Intercoms and recording device (NVR's/DVR's) are covered by a
three (3) year back-to base manufacturer warranty. (Note disk drives limited to 1 one year)

Our warranty is limited to the replacement of faulty goods and does not include damage due to incorrect fitting of parts or accessories.

It is the customers responsibility to ensure that items you order are correctly specified for the intended use.

Please refer to our Terms & Conditions and Warranty Against Defects documentation for full details.

Customer Support

At DIY Security Cameras we value our customers and the trust they have placed in us.

As part of our committment to providing exceptional customer service, we offer on-going after sales support for your Hikvision products. We have a professional team that are available to assist with setup and troubleshooting issues that may arise with your system.

Valued DIY Security Cameras customers enjoy access to our support logging system, regular updates to device firmware and specialised documentation as well as other benefits.

Our support team can be contact at support@diysecuritycameras.com.au

Accessories

Also Bought Products

5 other products in the same category

Close