Close
Reduced price! HIK-HIK-2CD4A26FWD-IZ/P View larger

Hikvision 2MP ANPR Bullet Camera, 120dB WDR, IR LED, IP67, PoE [DS-2CD4A26FWD-IZP]

New

$1,117.11 inc GST

$1,175.90 inc GST

-5%

  • 2.8mm - 12mm Variable Lens
  • 8mm - 32mm Variable Lens

In Stock

2MP Low Light ANPR IR Camera

  • 1/1.8" progressive scan CMOS
  • 2.8-12mm lens, for up to 10m plate recognition
  • 8-32mm lens, for up to 25m plate recognition
  • Full HD1080p video
  • Up to 60fps frame rate
  • Slow shutter
  • 120dB WDR
  • 3D DNR
  • Up to 50m IR/up to 100m IR 8-32mm lens
  • Motorised lens with smart focus
  • Support 128G on-board storage
  • DC12V/PoE
  • ANPR - SD Card required

More details

Hikvision aims at providing a reliable, accurate and cost-effective automatic number plate recognition (ANPR) solution with its range of ANPR cameras. The ANPR camera range supports powerful noise reduction and head light compensation technology to produce an excellent image for number plate recognition at night and are supported on the complete range of I-Series NVR and the Blazer express NVR.

Camera
Image Sensor: | 1/1.8" Progressive Scan CMOS 
Min. Illumination: | 0.002 Lux @ (F1.2, AGC ON), 0.0027 Lux @ (F1.4, AGC ON), 0 Lux with IR
Shutter time: | 1s ~ 1/100,000s
Slow shutter: | Support
Lens: | 2.8~12mm @ F1.4, angle of view: 92°~32°
8~32mm @F1.4,angle of view:50.4°-15.7°
Lens Mount: | AF automatic focusing and motorized zoom lens
Auto Iris: | DC drive
Day& Night: | IR cut filter with auto switch
Wide Dynamic Range: | 120 dB
Compression Standard
Video Compression: | H.264/MPEG4/MJPEG
H.264 code profile: | baseline profile/high profile/main profile
Video bit rate: | 32Kbps~16Mbps
Audio Compression: | G.711/G.722.1/G.726/MP2L2
Audio bit rate: | 64Kbps(G.711)/16Kbps(G.722.1)/16Kbps(G.726)/32-128Kbps(MP2L2)
Image
Max. Image Resolution: | 1920 x 1080
Frame Rate: | 50Hz:50fps(1920×1080), 50fps(1280×960), 50fps(1280×720)
60Hz:60fps(1920×1080), 60fps(1280×960), 60fps(1280×720)
Image Enhancement: | BLC/3D DNR/ROI/Defog/EIS
Image Settings: | Rotate Mode, Saturation, Brightness, Contrast, Sharpness adjustable by client software or web browser
Distortion Correction: | Support
Regional Cropping: | support
Picture Overlay: | LOGO picture can be overlaid on video with 128x128 24bit bmp format
Day/Night Switch: | Auto/Schedule/Triggered by Alarm In
Network
Network Storage: | NAS (Support NFS,SMB/CIFS), ANR
Alarm Trigger: | Motion detection, tampering alarm, network disconnect , IP address conflict, storage exception
Protocols: | TCP/IP, UDP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, Bonjour
Security: | User Authentication, Watermark, IP address filtering, Anonymous access
System Compatibility: | ONVIF, PSIA, CGI, ISAPI
Interface
Audio: | 1-ch 3.5 mm audio in (Mic in/Line in)/out interface
Communication Interface: | 1 RJ45 10M / 100M Ethernet interface
Alarm: | 1 input, 1 output (up to DC24V 1A or AC110V 500mA ) 
Alarm Input: | 1
Alarm Output: | 1
Video Input: | 1 RJ12 interface
Video Output: | 1Vp-p Composite Output (75 Ω, BNC)
On-board storage: | Built-in Micro SD/SDHC/SDXC slot, up to 128 GB
Reset Button: | Yes
Audio
Environment Noise Filtering: | Support
Audio I/O: | Support dual audio track, stereo
Audio Sampling Rate: | 16kHz / 32kHz / 44.1kHz / 48kHz
Smart Feature-set
Behavior Analysis: | Line crossing detection, Intrusion detection, Region entrance, Region exiting, Unattended baggage, Object removal
Line Crossing Detection: | Cross a pre-defined virtual line
Intrusion Detection: | Enter and loiter in a pre-defined virtual region
Region Entrance: | Enter a pre-defined virtual region from the outside place
Region Exiting: | Exit from a pre-defined virtual region
Unattended Baggage: | Objects left over in the pre-defined region such as the baggage, purse, dangerous materials
Object Removal: | Objects removed from the pre-defined region, such as the exhibits on display.
Exception Detections: | Scene change detection, Sudden audio increase/decrease detection, Audio loss detection, Defocus detection
Recognition: | Face detection recognition
Statistics: | Object Counting (Entrance and Exit object number is accounted and showed on screen in real time)
General
Operating Conditions: | -30 °C ~ 60 °C (-22 °F ~ 140 °F)
Humidity 95% or less (non-condensing)
Power Supply: | 12 V DC ± 10%, PoE (802.3at)
Power Consumption: | Max. 12 W
Weather Proof: | IP67
Dimensions: | 100×103.9×311.8 mm (3.94” × 4.09” × 12.28”)
Weight: | 200g
Please use this section to leave your comments about this product!
pdf-icon DS-2CD4A26FWD-IZ/P Datasheet

pdf-icon Network Camera User Manual

pdf-icon ANPR Setup Bulletin (V1.1)

Sample ANPR Images

All DIY Security Cameras, Hikvision Cameras, Intercoms and recording device (NVR's/DVR's) are covered by a
three (3) year back-to base manufacturer warranty. (Note disk drives limited to 1 one year)

Our warranty is limited to the replacement of faulty goods and does not include damage due to incorrect fitting of parts or accessories.

It is the customers responsibility to ensure that items you order are correctly specified for the intended use.

Please refer to our Terms & Conditions and Warranty Against Defects documentation for full details.

Sample ANPR Images

Customer Support

At DIY Security Cameras we value our customers and the trust they have placed in us.

As part of our committment to providing exceptional customer service, we offer on-going after sales support for your Hikvision products. We have a professional team that are available to assist with setup and troubleshooting issues that may arise with your system.

Valued DIY Security Cameras customers enjoy access to our support logging system, regular updates to device firmware and specialised documentation as well as other benefits.

Our support team can be contact at support@diysecuritycameras.com.au

Shipping and Delivery Policy

  • DIY Security Cameras deliver products Australia wide using a variety of courier companies for a flat fee.
  • Deliveries to Northern Territory need to be quoted. Please contact us for a quote.
  • Due to security reasons, all deliveries will need to be signed for at destination by the purchaser. In cases where the nominated purchaser is not available at the time of delivery at the location, then products will need to be collected from the designated place as determined by the courier company.
  • We do not deliver to PO Boxes.
  • We cannot leave your delivery at the front door.
  • Orders are dispatched within 3 business days and shipping times are estimated at between 3-5 business days depending on your location within Australia.
  • Please note that delivery times maybe extended over the Public Holiday periods.
  • All special orders and in some cases if the product is not available at our distributor and needs to be specially ordered from the manufacturer, product delivery time can take up to 4-5 weeks.

Also Bought Products

27 other products in the same category

Close