No products
Prices are inc GST
View larger 
New
The Hikvision DS-2CD4526FWD-IZP is a vandal proof dome camera with on-board ANPR analytics, this allows the camera to detect and recognise a vehicle's licence plate from a distance of up to 7 metres. The ANPR algorithm has been optimised for Australian number plates with 85% accuracy when installed correctly. The information collected is designed to then be sent through to an I-Series, Blazer Express NVR or HikCentral for access management. Powered by Hikvison's Darkfighter technology, this camera can capture a licence plate in low light and at high speeds of up to 80kmph.
| Camera | |
|---|---|
| Image Sensor: | 1/1.8" Progressive Scan CMOS |
| Min. Illumination: | Color: 0.002 Lux @ (F1.2, AGC ON) B/W: 0.00027 Lux @ (F1.4, AGC ON), 0 Lux with IR" |
| Shutter time: | 1 s to 1/100,000 s |
| Slow shutter: | Support |
| Lens: | 2.8 to 12 mm |
| Lens Mount: | φ14 |
| Wide Dynamic Range: | 120 dB |
| Digital noise reduction: | 3D DNR |
| Compression Standard | |
|---|---|
| Video Compression: | H.264+/H.264/MJPEG |
| Image | |
|---|---|
| Max. Image Resolution: | 1920 x 1080 |
| Frame Rate: | 50Hz: 50fps (1920 × 1080, 1280 × 960, 1280 × 720) 60Hz: 60fps (1920 × 1080, 1280 × 960, 1280 × 720) |
| Image Enhancement: | BLC, defog, EIS, lens distortion correction, 3D DNR |
| Image Settings: | Rotate Mode, Saturation, Brightness, Contrast, Sharpness adjustable by client software or web browser |
| Distortion Correction: | support |
| Target Cropping: | support |
| Picture Overlay: | LOGO picture can be overlaid on video with 128x128 24bit bmp format |
| Day/Night Switch: | Auto/Schedule/Triggered by Alarm In |
| Network | |
|---|---|
| Alarm Trigger: | Motion detection, tampering alarm, network disconnect , IP address conflict, storage exception |
| Protocols: | TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6 |
| General Function: | User Authentication, Watermark, IP address filtering |
| System Compatibility: | ONVIF (Profile S, Profile G), PSIA, CGI, ISAPI |
| Interface | |
|---|---|
| Communication Interface: | 1 RJ45 10M / 100M Ethernet interface |
| Alarm Input: | 1 |
| Alarm Output: | 1 |
| On-board storage: | Built-in Micro SD/SDHC/SDXC slot, up to 128 GB |
| Reset Button: | Yes |
| Audio | |
|---|---|
| Environment Noise Filtering: | Support |
| Audio Sampling Rate: | 16kHz / 32kHz / 44.1kHz / 48kHz |
| General | |
|---|---|
| Operating Conditions: | -30 °C – 60 °C (-22 °F – 140 °F) Humidity 95% or less (non-condensing) -H: -40 °C – 60 °C (-40 °F – 140 °F) with smart heater on |
| Power Supply: | 24VAC± 10%, 12 VDC ± 10%, PoE (802.3af) |
| Power Consumption: | 12 VDC, max. 14 W, 1.17 A; 24 VAC, max. 14 W, 0.58 A; PoE (802.3at, 42.5V-57V), max. 14 W, 0.33 A to 0.24 A With –H model: 12 VDC, max. 17 W, 1.42 A; 24 VAC, max. 17 W, 0.71 A; PoE (802.3at, 42.5V-57V), max. 17 W, 0.40 A to 0.29 A |
| Impact Protection: | IK10 |
| Weather Proof: | IP67 |
| IR Range: | Up to 40m |
| Dimensions: | Φ164.9 × 127 mm (Φ6.49″ × 5″) |
| Weight: | Approx. 1320 g (2.91 lb) With package: 2100 g (4.63 lb) |
DS-2CD4526FWD-IZP Datasheet DS-2CD4526FWD-IZP User Manual
Hik-Connect OneApp for All
All Hikvision Mobile Clients are now available at the Hikvision App Store
Hikvision PC/Mac Clients are now available at the Hikvision Support Download Site
All DIY Security Cameras, Hikvision Cameras, Intercoms and recording device (NVR's/DVR's) are covered by a
three (3) year back-to base manufacturer warranty. (Note disk drives limited to 1 one year)
Our warranty is limited to the replacement of faulty goods and does not include damage due to incorrect fitting of parts or accessories.
It is the customers responsibility to ensure that items you order are correctly specified for the intended use.
Please refer to our Terms & Conditions and Warranty Against Defects documentation for full details.
At DIY Security Cameras we value our customers and the trust they have placed in us.
As part of our committment to providing exceptional customer service, we offer on-going after sales support for your Hikvision products. We have a professional team that are available to assist with setup and troubleshooting issues that may arise with your system.
Valued DIY Security Cameras customers enjoy access to our support logging system, regular updates to device firmware and specialised documentation as well as other benefits.
Our support team can be contact at support@diysecuritycameras.com.au
